Basic Installation; Hardware Setup; Method 1 - Poe With Poe Switch Or Router - D-Link Nuclias Connect DAP-2622 User Manual

D-Link DAP-2622 User Manual
To power the access point, you can use one of the following 2 methods:
Method 1 - Use if you have a PoE switch or router
Method 2 - Use if you have a PoE injector and do not have a PoE-capable switch or router

Method 1 - PoE with PoE Switch or Router

Plug in one end of your Ethernet cable into the LAN port of the DAP-2622's back panel,
and the other end into the port on a switch.
Configure the Access Point
1. Connect the access point and your computer to the same PoE switch. Manage the
access point from the computer.
2. Enter dap2622.local in the address field of your browser.
3. Log in to the Administration Web pages. The default login information is:
Username: admin
Password: admin

Basic Installation

Hardware Setup

DAP-2622
PoE Switch
Computer
8