Page 1
Quick Installation Guide Nuclias Connect AC1300 Wave 2 Dual Band PoE Access Point This document will guide you through the basic installation process for your new D-Link Wireless AC Access Point. DAP-2610 Documentation also available on the D-Link Website...
Quick Start Guide If any of the above items are missing, please contact your reseller. NOTE no PSU supplied. To power the units use an D-Link PoE switch or the D-Link DPE-101GI PoE injector. D-Link DAP-2610 Quick Install Guide...
Interfaces Power Receptor (*Note no longer used, replaced by PoE) LAN Port (PoE) * PoE kit (injector and adapter) is NOT include in the package and it can be purchased with the model name "DPE-101GI". D-Link DAP-2610 Quick Install Guide...
Power on the access point To power on the DAP-2610, you can use ONE of the following methods: 1. Plug one end of your Ethernet cable into the LAN port of the DAP-2610, and the other end into a port on a PoE switch.
Page 5
Take out the mounting ring. port on the access point. 3. Drill holes in the marked points and 6. To attach the access point to the insert the plastic wall anchors. mounting bracket. dlink.com/support TECHNICAL SUPPORT D-Link DAP-2610 Quick Install Guide...