Replacing The Lamp - LG BS275 Manual

Replacing the lamp

The projector will detect the lamp life itself. It will show you a
warning message
When you see this message, please contact your local reseller
Warning: Lamp com-
partment may be hot!
or service center to change the lamp as soon as possible. Make
Allow it to cool down
sure the projector has been cooled down for at least 45 min-
before changing the
utes before changing the lamp.
lamp!
Lamp Replacing Procedure:
1. Switch off the power to the projector by pressing the "POW-
2. Allow the projector to cool down at least 45 minutes.
Warning: To reduce the
3. Disconnect the power cable.
risk of personal injury,
4. Use a screwdriver to remove the 2 screws from the cover. 
do not drop the lamp
module or touch the 5. Push up and remove the cover.
lamp bulb. The bulb
6. Remove the 2 screws from the lamp module  and pull up
may shatter and cause
injury if it is dropped.
7. Pull out the lamp module by force. 
8. Install the new lamp module by reversing the previous steps.
9. After replacing the lamp, turn on the power, and select the
All manuals and user guides at all-guides.com
Appendices
2
3
4
ER".
the lamp bar. 
menu ->[OPTIONS|Lamp Settings] ->[Lamp Counter Reset]
to reset the lamp usage hours. See page 33.
1
English
English
39