2-21. MAIN BOARD BLOCK
4 three screws
(X5CD/X5CDB)
4 screw
(BVTP3
6)
5 Remove the MAIN board
block in the direction
of the arrow.
Note 1: When you install the connector, please install them correctly.
There is a possibility that this machine damages when not
correctly installing it.
OK
Insert is straight
Insert is shallow
to the interior.
connector
connector
connector
(BVTP3
6)
7 MAIN board block
3 flexible flat cable (7P)
2 Peel off the
(CN502)
adhesive sheet.
NG
NG
Insert is incline
connector
connector
connector
CMT-X5CD/X5CDB/X7CD/X7CDB
6 connector
(CN901)
1 Remove the wire
from the coating clip.
MAIN board
Note 2: When installing the flexible flat cable, ensure that
the colored line is not slanted after insertion.
OK
Insert is straight to the interior.
flexible flat
cable
colored line
connector
coating clip
power unit (PWR1)
NG
Insert is incline
flexible flat
cable
colored line
connector
31