Jack Board Block (X5Cd/X5Cdb) - Sony CMT-X5CD Service Manual

2-13. JACK BOARD BLOCK (X5CD/X5CDB)

Note 2: When installing the flexible flat cable, ensure that
the colored line is not slanted after insertion.
OK
Insert is straight to the interior.
flexible flat
cable
colored line
connector
main chassis
guide line
cushion (FFC)
MAIN board
5 cushion (FFC)
MAIN board
6 flexible flat cable (9P)
(CN002)
Note 1: When you install the connector, please install them correctly.
There is a possibility that this machine damages when not
correctly installing it.
OK
Insert is straight
Insert is shallow
to the interior.
connector
connector
connector
NG
Insert is incline
flexible flat
cable
colored line
connector
3 cushion
(jack)
4 PWB cushion
(JACK)
7 connector
(CN702)
NG NG
Insert is incline
connector
connector connector
CMT-X5CD/X5CDB/X7CD/X7CDB
MAIN board
guide line
cushion
(main PWB)
PWB cushion
(JACK)
8 three screws
(BVTP3 6)
9 JACK board block
2 flexible flat cable (15P)
(CN507)
1 connector
(CN1504)
flexible flat cable (15P)
(FFC10)
Note 4: Press the insertion in the
Note 3: Press the wire into
JACK board
CN1504
Ver. 1.1
cushion (jack)
Note 5: Pass the wire over the
cushion (main PWB).
JACK board
MAIN
board
direction of the arrow.
the JACK board.
25