Bluetooth Module Block, Main Chassis Block-3 - Sony CMT-X5CD Service Manual

CMT-X5CD/X5CDB/X7CD/X7CDB
Ver. 1.1
2-6.

BLUETOOTH MODULE BLOCK, MAIN CHASSIS BLOCK-3

Wire e i
Note 2: When installing the flexible flat cable,
align the cables vertically.
OK
flexible flat cable (14P)
(FFC9)
flexible flat cable (8P)
(FFC8)
6 bluetooth
module
block
5 flexible flat cable (14P)
4 Peel off the
1 cushion
(PWR)
2 Peel off the
adhesive sheet.
Wire e i
MAIN board
flexible flat cable (14P)
(FFC9)
18
NG
flexible flat cable (14P)
(FFC9)
flexible flat cable (8P)
(FFC8)
3 flexible flat cable (8P)
(CN009)
(CN005)
adhesive sheet.
7 cushion
flexible flat cable (8P)
(FFC8)
Note 1: When installing the flexible flat cable, ensure that
the colored line is not slanted after insertion.
OK
Insert is straight to the interior.
flexible flat
cable
colored line
connector
9 main chassis block
8 connector
A
A
(jack)
7 cushion
(jack)
WiFi
module
(WIFI1)
Note 3: When affixing the cushion, be sure
hole
NG
Insert is incline
flexible flat
cable
colored line
connector
(X7CD/X7CDB)
Wire e i
Note 4: Pass the wire between the screws
and the shield.
connector
JACK-NET board
MAIN flexible flat
board cable (24P)
Note 5: The wire must not touch
flexible flat cable (24P).
that it does not obstruct the hole.
cushion (PWR)
cushion
(jack)