4.
Disconnect the harness from the connector (CN0100) on the DD-53 board.
5.
Remove the four precision screws, and then remove the BT holder assembly.
Arrangement of
harness
Harness
6.
Remove the four precision screws.
7.
Release the two bosses, and then remove the DD-53 board in the direction of the arrow.
8.
Disconnect the flexible board from the connector (CN0604) on the DD-53 board.
9.
Disconnect the harness from the connector (CN0601) on the DD-53 board.
Flexible board
Harness
CN0100
DD-53 board
DD-53 board
Hole
CN0604
Hole
CN0601
Harness
Precision screws
(P2 x 4)
BT holder assembly
Precision screws
(P2 x 4)
Boss
Boss
65