3.
Remove the precision screw (P2 x 4), and then DC cable clamper.
4.
Remove the 12 precision screws (P2 x 4).
5.
Release the two hooks, and then remove the outside panel assembly.
Note
Be careful not to break the flexible flat cable.
6.
Disconnect the flexible flat cable from the connector (CN4612) on the CT-287A board.
Precision
screws
(P2 x 4)
Outside panel assembly
Precision
screw
(P2 x 4)
Precision
screw
(P2 x 4)
DC cable clamper
Precision screws
(P2 x 4)
7.
Install the removed parts by reversing the steps of removal.
Precision
screw
(P2 x 4)
Precision screws
(P2 x 4)
CN4612
CT-287A board
Hooks
Flexible flat cable
26