5.
Turn the hinge portion in the direction of the arrow.
6.
Remove the two precision screws.
7.
Release the two hooks (hanging portion) and five hooks, and then remove the P cabinet C assembly.
Hinge portion
Precision screws
(P2 x 4)
8.
Disconnect the fine-wire coaxial cable from the connector (CN6001) on the PD-126 board.
9.
Disconnect the flexible board from the connector (CN6002) on the PD-126 board.
10. Remove the two precision screws.
11. Remove the two hanging portions, and then remove the PD-126 board.
Precision screws
(P2 x 4)
CN6001
Fine-wire coaxial cable
PD-126 board
CN6002
Hooks
Hooks
(hanging portion)
Hooks
P cabinet C assembly
Hanging portions
Flexible board
58