5.
Remove the waterproof sheet (IF).
6.
Remove the four precision screws, and then remove the control panel block and the microphone unit.
7.
Disconnect the flexible board from the connector (CN9015) on the IF-1346 board.
8.
Disconnect the flexible flat cable from the connector (CN9018) on the IF-1346 board.
Waterproof sheet (IF)
CN9015
Flexible flat cable
Handle assembly
Precision screws
(P2 x 4)
Flexible board
IF-1346 board
CN9018
Control panel block
Microphone unit
55