Sony PXW-Z190V Service Manual page 25

Type D
Disconnecting
1. Raise the pull-bar in the direction of arrow A to unlock it.
2. Hold both sides of the fine-wire coaxial cable connector, and pull the connector straight to disconnect it.
Pull-bar
A
Connecting
1. Hold both sides of the fine-wire coaxial cable connector with the contact surface facing up.
2. Insert the connector straight to meet the angle specified.
3. Turn the pull-bar in the direction of arrow B and lock it.
Pull-bar
Contact surface
Connecting connector
Fine-wire coaxial cable
Pull-bar
B
Note
Insert the connector carefully so that the connector guides are not caught by the edge of the mating connector.
Correct
Fine-wire
coaxial cable
Connector
Wrong
Fine-wire coaxial cable
Hold the connector to disconnect.
Do not attempt to disconnect by
pulling the cable.
Angle regulation
Less than 2°
Less than 5°
22