Cable Or Antenna - Sony KDS-70Q006 Service Manual

Sxrd projection tv
Hide thumbs Also See for KDS-70Q006:
Table of Contents

Advertisement

Cable or Antenna

For best results, use one of the following connections if you are
connecting a cable or an antenna and you:
Do not need a cable box to unscramble channels. (If you have a cable
box, see pages 37 and 38.)
Do not intend to connect a VCR. (If you have a VCR, see pages 41 and
42.)
The connection you choose depends on the cable type you have in your
home, as described below.
75-ohm coaxial cable (usually found in newer homes)
Cable Type
Connect As Shown
VHF Only or
75-ohm coaxial
combined
cable
VHF/UHF
Cable
75-ohm coaxial
cable
300-ohm twin lead cable (usually found in older homes)
Cable Type
Connect As Shown
VHF Only or
300-ohm twin lead cable
UHF Only or
combined
VHF/UHF
Antenna connector
(not supplied)
75-ohm coaxial and 300-ohm twin lead cable (found in some homes)
Cable Type
Connect As Shown
VHF and UHF
75-ohm coaxial cable
300-ohm twin lead cable
Setting Up the SXRD Projection TV
Rear of SXRD
Projection TV
VHF/UHF
Rear of SXRD
Projection TV
CABLE
Rear of SXRD Projection TV
VHF/UHF
Rear of SXRD
Projection TV
VHF/UHF
U/V mixer
(not supplied)
35

Advertisement

Table of Contents
loading

Table of Contents