Attaching The Speakers - Sony KDS-70Q006 Service Manual

Introducing the Sony SXRD Projection TV
Attaching the
Speakers
18
Your SXRD projection TV comes with detachable speakers. You can enjoy
the TV with or without the included speakers. The speakers are packed
separately in the packing box.
✍
Do not carry the SXRD projection TV with the speakers attached. If you
need to move the TV, do so before attaching the speakers.
To attach the speakers to your SXRD projection TV, follow the steps below:
1
Hold the left speaker upright. Insert the metal hook located on the top of
the speaker into the slot on the rear of the TV (upper right-hand corner)
and slowly move the speaker closer to the TV.
Rear of SXRD
projection TV
2
Locate the black pin near the center of the speaker's attachment tab and
the matching hole on the rear of the TV. Insert the pin into the hole until
it locks into place.
Hole
Rear of SXRD
projection TV
Slot
Metal hook
Screw
Left speaker
Black pin
Screw
Left speaker
Screw