Sony KDS-70Q006 Service Manual page 249

Flashing Indicators on the Front of the TV
LAMP STANDBY TIMER
STD / DUO
The POWER/STANDBY (green or red) and/or LAMP (red) indicators light
or flash if there is a problem with or change in the condition of the SXRD
projection TV.
The POWER/STANDBY (green) indicator flashes.
❑
The lamp for the light source is ready to turn on.
The POWER/STANDBY (red) indicator flashes three times.
❑
The lamp cover is not attached securely. When you secure the lamp
cover, the POWER/STANDBY indicator flashes in red and the SXRD
projection TV enters the standby mode (see page 26).
The LAMP indicator flashes.
❑
The lamp for the light source has burned out.
Replace it with a new one (see page 20).
If the SXRD projection TV does not function properly after correcting the
problems, contact qualified Sony personnel.
POWER
STD/DUO
POWER/STANDBY
POWER
Other Information
137