Basic Connections (Connecting Cable Tv Or Antenna); Cable And Antenna - Sony KP-46WT500 Operating Instructions Manual

01COV.book Page 16 Tuesday, July 30, 2002 3:46 PM
Installing and Connecting the Projection TV

Basic Connections (Connecting Cable TV or Antenna)

Connecting Directly
to Cable or an
Antenna

Cable and Antenna

16
Model name1[KP-46WT500] Model name2[KP-51WS500] Model name3[KP-57WS500] Model name4[KP-65WS500]
The connection you choose depends on the cable found in your home. Newer
homes are equipped with standard coaxial cable (see A); older homes
probably have 300-ohm twin lead cable (see B); other homes may contain
both (see C).
A
VHF Only or VHF/UHF or Cable
75-ohm coaxial
cable
B
VHF Only or UHF Only or VHF/UHF
300-ohm twin lead cable
Antenna connector
C
VHF and UHF
75-ohm coaxial cable
300-ohm twin lead cable
If your cable provider does not feature local channels, you may find this
setup convenient.
CATV cable
(No connection to
TO CONVERTER)
Antenna cable
Select CABLE or antenna (ANT) mode by pressing
control.
✍
To receive channels with an antenna, you need to turn your Cable to OFF
(see page 53) and perform the Auto Program function (see page 54).
VHF/UHF
Rear of projection TV
VHF/UHF
Rear of projection TV
VHF/UHF
Rear of projection TV
U/V Splitter
(not supplied)
AUX
TO
CONVERTER
Rear of projection TV
VHF/UHF
on the remote
ANT
[4-088-847-12]