Sony KDS-70Q006 Service Manual page 215

Using the i.LINK Control Panel
The DTV window appears only if the
i.LINK menus were entered while
watching a digital TV channel
After you select an i.LINK device using the Device List, the SXRD
projection TV displays the i.LINK Control Panel, which allows you to use
the SXRD projection TV's remote to control the selected i.LINK device.
1
If the i.LINK Control Panel is not already displayed, press
remote control.
✍
If i.LINK is pressed while the SXRD projection TV is displaying an analog
or digital channel (not the i.LINK device), then the Device List will
appear. Select the desired device from the list and press
the Control Panel.
2
Press V v B b on the remote control to navigate through the options
available in the i.LINK Control Panel.
3
Press to select a desired option.
4
Press to exit the Control Panel and view the i.LINK device full-
EXIT
screen.
✍
To exit i.LINK mode, select DTV from the Device List or press CH+/–.
i.LINK
Back to Device List
Control Panel
52.3 Exit i.LINK
The i.LINK Control Panel displays the signal from the SXRD projection TV
to the left on screen (if available), and the signal from the currently selected
device to the right on screen.
Power
Setup Swap Audio
Full Screen
Status: Playing.
Using i.LINK
on the
i.LINK
to display
VICTOR HM-DH35000
00:00:31
(Continued)
103