Error Code List - Sony PMW-50 Service Manual

3-4.

Error Code List

When warning, caution, or checking of operation is needed, the unit indicates a message on the LCD monitor, blinks
the TALLY LED, and beeps a warning.
When an error is detected, the error code is displayed on the LCD monitor and operation is stopped. Error codes are
displayed as E-xxxxx (x: number).
Error code Description
E-15030 System error
E-17001 The media ID data in the EEPROM is abnormal
E-17003 The display block does not start
E-17004 The media block does not start
E-17006 The display block startup processing is abnormal
E-17007 The media block startup processing is abnormal
E-17015 The media block is abnormal
E-17017 Media block internal error
E-4xxxx
If two or more errors occur simultaneously
The highest-priority error is displayed.
When an error with a higher priority has been cleared, the one with the next priority is displayed.
PMW-50
Service action
Repair the DPR-350 board or replace it.
Rewrite the media ID data in the EEPROM.
For details, contact your local Sony Sales Office/Serv-
ice Center.
Repair the DCP-60 board or replace it.
Repair the DPR-350 board or replace it.
Repair the DCP-60 board or replace it.
Repair the DPR-350 board or replace it.
Repair the DPR-350 board or replace it.
Repair the DPR-350 board or replace it.
3-11