Sony HXCU-FB80 Service Manual page 52

3-17. LED-545 Board
Preparation
1. Remove the cover. (Refer to
2. Remove the front panel assembly. (Refer to
Procedure
1. Disconnect the flexible flat cable (10 core) from the connector (CN1) on the LED-545 board.
2. Remove the screw, then remove the LED-545 board.
LED-545 board
3. Install the removed parts by reversing the steps of removal.
HXCU-FB80
"3-2. Cover".)
"3-3. Front Panel
PSW
3 x 6
CN1
Flexible flat cable (10 core)
Assembly".)
3-24