Sony HXCU-FB80 Service Manual page 41

Procedure
1. Disconnect the harness and cables.
(1) Open the clampers (1) to (4).
(2) Disconnect the harness from the connector (CN004) on the PS-934 board.
(3) Disconnect the two optical fiber cables from the AT-196 board.
t
For the connection of the
optical fiber cables, refer to the
indication on the AT-196 board.
Optical connector
No CN
1 2 Neutrlk
2 1 LEMO
AT-196 board
HXCU-FB80
[ 1 ]
AT-196 board Optical fiber cables
Clamper (1)
[ 2 ] PS-934 board
CN004
LEMO connector
Clamper (2)
Clamper (3)
Clamper (4)
3-13