Table of Contents
Advertisement
2.
Remove the LEMO connector.
(1) Remove the two screws, then remove the bracket and cap (LEMO) from the rear panel.
(2) Remove the four screws, then remove the LEMO connector.
Bosses
Bracket
Holes
Note
• When attaching the bracket, align the four bosses with the four holes.
• When attaching the LEMO connector, make sure that the directions of the bracket and LEMO connector are
correct.
3.
Install the removed parts by reversing the steps of removal.
HXCU-FB80
Boss
Red mark
LEMO connector
PSW3 x 6
PSW3 x 6
Rear panel
Cap (LEMO)
3-14
Hide quick links:
Advertisement
Table of Contents
