Maintenance
15. Install the ink cartridge (see the label to the right of the cartridge holder).
16. Rotate the guard back to the closed position.
17. Close the cover; the ink cartridge moves back to the original position.
18. Tap Done.
19. Print a print test pattern to be sure that your printhead is functioning properly.
20. If the test pattern looks good, tap Done.
Installing the printhead
You may need to install a new printhead when the existing printhead is producing poor print quality.
1. Tap Settings on the toolbar.
2. Scroll down and tap Envelope Printing or Print on Envelopes.
3. Tap Install Printhead.
4. Lift the cover; the ink cartridge moves to the front position.
5. Flip the ink cartridge guard open.
6. Remove the ink cartridge as shown on the label to the right of the cartridge holder.
Pitney Bowes
Operator Guide
February 2021
177