Zeroing The Scale - Pitney Bowes SendPro C Lite Operator's Manual

1. Check the level of sealing solution in the moistener tank. Add more if required.
2. Slide the envelope flap under the edge of the feed deck so the moistener can wet the flap.
Important: If the moistener tank is full and your envelopes do not seal correctly, clean or replace the
moistener brush and wick.

Zeroing the scale

Zero the scale to set the weight to zero.
Make sure there is nothing on the scale when you zero it.
Pitney Bowes Operator Guide February 2021
Printing on envelopes
130