Adding A Graphic To Your Envelope Or Tape; Sending Mail Using Electronic Return Receipt (Err) - Pitney Bowes SendPro C Lite Operator's Manual

5. Place the envelope or envelopes on the feed deck. Depending on the SendPro C model you have,
feed the envelopes manually or tap Start to feed the envelopes.

Adding a graphic to your envelope or tape

Your device comes with a set of standard graphic images that you can add to your envelopes or tapes
when you print your postage. Graphic ads are also known as ads, slogans or logos. Examples include
PLEASE OPEN IMMEDIATELY, RECYCLE, and Season's Greetings.
Note: At this time, you cannot add your own custom graphics to 2H00 SendPro C, SendPro+ devices.
1. Weigh your envelope, select a class, and select any special services required.
2. Tap the Graphics icon on the Envelope Printing screen.
3. Select the graphic you wish to use.
4. Tap Apply.
5. Place the envelope or envelopes on the feed deck. Depending on the SendPro C model you have,
feed the envelopes manually or tap Start to feed the envelopes.
To remove a graphic:
1. Tap the current graphic to deselect it.
2. Tap Apply.
Related topics:

Sending mail using Electronic Return Receipt (ERR)

Tracking services are available when you use the scale or Manual Weight entry method. The following
steps are based on using Priority class and the Electronic Certified service with Electronic Return
Receipt (ERR).
In order to use ERR, you must submit Form 5053, Bulk Proof of Delivery to the USPS. The USPS then
provide you with a 9-digit USPS Mailer ID. You need to enter this number when using ERR. The
following procedure is an example of how to use ERR.
Pitney Bowes Operator Guide February 2021
Printing on envelopes
132