Electrical Connection - Gaggia La Giusta User Manual

Before connecting
water filter to the machine,
perform a wash cycle until
the water is clear. Then
connect the water filter to
the machine.
Should the mains pressure
be higher than 0,5 MPa, a
pressure reducer balanced
for high pressure should be
installed (device in which
any mains
increase does not effect
the output pressure).
In case of filling tube
replacement, use the new
set of tubes supplied with
the appliance. Do not use
the old set anymore.
the
5.2
Before
electrical connection,make
sure that the voltage rating
corresponds
indicated on the CE plate
and on the connection
plate on the power supply
cable. Check to ensure that
the electrical supply line is
able
machine load (see chapter
"Technical features").
pressure
Check that the power
supply cable is efficient and
that
national
safety standards.
The user must undertake
to power the machine
protecting the power line
using
switch
complies
legislation in force in the
country itself.

Electrical connection

proceeding
with
to support
it complies
and
a suitable
(cut-out)
with
English
with
that
the
with
European
safety
that
the
63