Connecting The Terminal Block To The Scxi Module - National Instruments SCXI-1324 Installation Manual

1 Assembly Number

Connecting the Terminal Block to the SCXI Module

1 SCXI Module
© National Instruments Corporation
1 2
2 Product Name
Figure 2. SCXI-1324 Signal Connections
To connect the terminal block to the SCXI module front connector, refer to
Figure 3 while performing the following steps:
1. Connect the module front connector to its mating connector on the
terminal block.
2. Tighten the top and bottom thumbscrews on the back of the terminal
block to hold it securely in place.
3
2
S C
X I
1 1
0 0
2 SCXI-1324 Terminal Block
Figure 3. SCXI-1324 Terminal Block Installation
3
3 Serial Number
1
3 Thumbscrew
5 SCXI-1324 Installation Guide