Connecting The Analog Bus - Agilent Technologies E1476A User Manual

Connecting the
The analog bus provides a common bus to all switch modules in a switchbox
or scanning voltmeter to which a single voltmeter can be connected. You
Analog Bus
must connect the flat ribbon analog bus cables between multiplexers and
other VXI modules that have an analog bus (both C-size modules or B-size
modules in a C-size adapter).
Connecting to a
E1411B 5-Digit Multimeter users (and E1326B in a C-size adapter) must
Multimeter
continue the analog bus connection between multiplexers and switch
modules to the multimeter to use the scanning and measurement capability
of the multimeter. These cables provide the input to the multimeter from the
multiplexer/switch channels. See Figure 1-12 for connection details.
NOTE
Use the 19.5 inch analog bus cable (part number E1326-61611) for analog
bus connection between an E1326B and the E1476A.
Command E1411B
Module
Analog Bus Cables
(E1400-61605)
ANALOG
BUS
E1411B E1476A E1476A
Multimeter Multiplexer Multiplexer
E1476A
Multiplexer Modules
Figure 1-12. E1411B Connections to the Analog Bus
24 Getting Started Chapter 1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com