2.5
Battery use and care
▶ Observe the special regulations and instructions applicable to the transport, storage and use of Li-ion
batteries.
▶ Do not expose batteries to high temperatures, direct sunlight or fire.
▶ Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C.
▶ Do not use or charge batteries that have suffered mechanical impact, have been dropped from a height
or show signs of damage. In this case, always contact your Hilti Service.
▶ If the battery is too hot to touch it may be defective. In this case, place the product in a non-flammable
location, well away from flammable materials, where it can be kept under observation and allowed to
cool down. In this case, always contact your Hilti Service.
3
Description
3.1
Overview of the product
3.2
Intended use
The product described is a cordless rotary hammer drill. It is designed for drilling in steel, wood and masonry,
for hammer-action drilling in concrete and masonry, and for driving and removing screws. The product can
also be used for light chiseling work on masonry and surface finishing on concrete.
▶ Use only Hilti lithiumion batteries of the B 22 series with this product.
▶ Use only the Hilti lithium-ion batteries from the B22 series for this product.
3.3
Lithiumion battery status display
The charge status of the Li-ion battery and malfunctions of the power tool are indicated by the display on
the Liion battery. The charge status of the Liion battery is displayed after pressing one of the two battery
release buttons.
Status
4 LEDs light up.
*2166350*
1
@
;
=
%
&
(
)
+
§
/
:
∙
$
£
Meaning
Charge status: 75 % to 100 %
2166350
Dust shield
chuck
Insert tool unlocking device
Depth gauge
Function selector switch
Forward / reverse selector switch with safety
lock
Control switch
Grip
Battery release buttons
Charge status and fault display (Li-ion bat-
tery)
Battery
Connection for the TE DRS-6-A(02) dust re-
moval module
Side handle
Light to illuminate the work area
English
5