Powering Off And Restarting - ATEN CS-128A User Manual

Powering Off and Restarting

If it becomes necessary to Power Off one of the Master View units, before
starting it back up you must do the following:
1. Shut down all the computers that are attached to it, as well as all the stations
and all the computers that are daisy chained down from it (all the child
stations and the computers attached to them).
Note: 1. You must unplug the power cords of any computers connected to
the powered off Master View that have the Keyboard Power On
function. Otherwise, it will still receive power from the computers.
2. If the unit is operating under external power, unplug the power
adapter cable.
2. Wait 10 seconds, then plug the Master View CS-128A stations back in,
starting with the last station in the chain and working back to the station you
originally shut down.
3. After all the Master View's are up, power On the computers, starting with
the ones attached to the last station in the chain and working back to the
station you originally shut down.
CS-128A User Manual 11