ATEN CS-128A User Manual page 13

4. Repeat steps 1 - 3 for any other Third Stage units you wish to connect.
5. For each Third Stage unit, plug the power adapter cable into the Master
View's Power Jack; plug the power adapter into an AC source.
6. Plug in the power adapters for all the Second Stage Master View units.
7. Plug in the power adapter for the First Stage Master View unit.
8. Turn on the power to all the computers.
Note: The Power On sequence requires that all Third Stage units be powered
on first. After they are all on, the Second Stage units must be powered
on next. After all the Second Stage units are on, the First Stage unit must
be powered on. Only after all the Master Views have been powered on
in this sequence, can the computers can be powered on.
CS-128A User Manual 9