Making The Connections - Ask Proxima Impression A9 User Manual

USER GUIDE

6 MAKING THE CONNECTIONS

The projector may be connected to different equipment. The following
sections describe in detail how to connect to these systems.
See the illustration on the rear of the quick set-up card on how the various
system parts connect together.
Be aware of static electricity that may build up in the dry season and when
operating on synthetic carpets. Discharge any static electricity by touching a
metallic surface before you start.
Various cables are supplied or optionally available to connect to different
sources. Follow the list below in numerical order for a trouble-free set-up!
1. SWITCH OFF all equipment before making all the connections.
2. COMPUTER CABLE.
Connection to the projector is made through a basic computer cable and
appropriate adapters.
PC. Use the computer cable directly to connect the graphics
port of the PC to the SOURCE 1 or SOURCE 2 connector on
the projector. If needed, connect your monitor cable to the free
branch on the computer cable.
MAC. Use the optional MAC adapters, as marked, on the
computer end of the computer cable to adapt to the graphics-
port connector and monitor connector on the MAC.
NEC. Use the optional NEC adapters, as marked, on the
computer end of the computer cable to adapt to the graphics-
port connector and monitor connector on the NEC.
XGA LCD PROJECTOR
13