Ask Proxima Impression A9 User Manual page 14

USER GUIDE
3. SOUND.
The computer cable has a sound input branch at the projector end.
Connect sound from the computer using a standard 3.5-mm stereo jack
line cable (not supplied), or use the additional sound inputs (AUDIO 1 for
SOURCE 1 or AUDIO 2 for SOURCE 2).
4. MOUSE.
To enable mouse control from the remote control, a connection is made
using a mouse cable and various adapters. Connect the cable directly to
one of the MOUSE connectors on the projector (see illustration below).
Connect the appropriate adapter to the free end of the mouse cable at
the computer end as described below.
AUDIO OUT REMOTE RS-232 USB MOUSE 2
MOUSE 1
SERIAL (RS 232). Use the serial adapter with a branch for the
local computer mouse. The serial adapter is fitted with a 9-pin
DSUB connector. Use an extra 9- to 25-pin adapter (available
from your dealer) if your computer has a 25-pin serial
connector. Connect your computer mouse to the free branch of
the adapter if desired. With some computers, the branched
adapter may not work. For this purpose, an optional straight
serial adapter is available.
PS/2. Use the PS/2 adapter that connects directly to your
computer mouse port. Running the computer mouse in parallel
is not possible, unless your computer itself has provision for two
mice simultaneously. You may consider using the above serial
adapter and run your mouse on the serial port instead, in order
to be able to run your local mouse in parallel. This will require a
different mouse driver setting. Please consult your computer
documentation or local dealer for details.
MAC. Use the optional MAC mouse adapter to connect to the
mouse port on your MAC computer.
XGA LCD PROJECTOR
MOUSE 1 AUDIO 1 SOURCE 1
Connector panel
14
AUDIO 2 SOURCE 2