Ask Proxima Impression A9 User Manual page 8

USER GUIDE
projector to a switched mains power supply, and switch off when not in
use, for maximum protection against fire. Switching off using the remote
control only puts the projector in a standby (sleep) mode with live
internal voltages.
10. VENTILATION - Slots and openings in the projector housing (see
illustration below) are provided for ventilation. Air inlet filters are
employed to reduce dust build-up internally. Periodically vacuum the
filters (from the outside of the ventilation grilles) as needed. To ensure
reliable operation of the projector and protection from overheating, do
not block or cover slots or openings in any way. Do not insert any foreign
objects or instruments into the slots and openings, as this may block the
ventilation fans. Do not place the projector on a soft surface (carpet
etc.). Never install the projector in an enclosed unit unless it is properly
ventilated by a separate cooling system.
11. HEAT - The projector should be situated away from heat sources such
as sunlight, radiators stoves or other strong heat sources. Do not
operate the projector outside the maximum temperature specifications.
12. OBJECT OR LIQUID ENTRY - Care should be taken that objects are
not put or do not fall into the projector housing. Be careful not to spill
liquids that may flow into the projector interior. Do not insert metal or
flammable objects into the projector.
13. POWER SOURCES - The projector must only be connected to proper
electrical voltage as marked on the projector body, on the label at the
power inlet. The projector should be connected to the electrical outlet
XGA LCD PROJECTOR
Ventilation slots
8