Ask Proxima Impression 960 User Manual page 31

USER GUIDE
The lamp has only 50 hours burning time left, and should be changed.
Remember that you can check accumulated lamp usage each time the
lamp is activated. A message appears in the lower left hand corner of the
screen stating software revision and lamp hours used.
If you do not respond to the first message, a second message will appear
when the lamp has exceeded recommended burning time. Please read
Warnings and Notes in Lamp Replacement section carefully before
proceeding with lamp change.
Lamp has exceeded its lamp life of 750 hours
Continued use leads to a high risk of lamp explosion
If you replace the lamp and reset the lamp timer, the message below
confirms that the operation has been successful.
Press any key to clear this message...
If the lamp timer is accidentally reset while operating a lamp which has not
reached expected lifetime, or you change lamp before it is required and
reset the timer, the warning below appears. This leaves you with two
alternatives which are both described in the next paragraphs.
The lamp change indicator has been activated,
though the lamp has not reached expected lifetime.
or press any other key to continue...
If you have changed the lamp on purpose before required, this message
appears when you confirm by pressing RESET.
PLEASE CHANGE LAMP IMMEDIATELY ! ! !
The lamp timer has been reset to 0
Press RESET to confirm lamp change,
The lamp timer has been reset to 0
WARNING!
INFO!
WARNING!
INFO!
30
LCD PROJECTOR