Table of Contents
Advertisement
USER GUIDE
9
FEATURES
The LCD projector has a variety of different features implemented. This
chapter explains each feature in detail.
9.1.1
INTELLIGENT SAFECOOL SYSTEM
The fan operates as long as the LCD projector is switched on. Provided
that the power cord is connected, the fan continues to run for 2 minutes
even after the unit has been switched off. This ensures a continuous
protection against high temperature inside the projector. The cooling
system is designed to minimize stray light and noise. If the air flow is
blocked, a temperature safety fuse will automatically shut off the projector
to protect it from overheating.
9.1.2
SET-UP MEMORY
The user controlled set-up, that usually is done when the projector is
connected to a new computer, is automatically memorized for future use.
The set-up information is stored in a non-volatile memory approximately 5
seconds after the last key is pressed.
The memory can store 40 different sources/modes. Some sources are
predefined, while the remaining are available for customer set-up. See the
Technical Data section for compatibility.
Custom sources are added to the memory only if their sync pattern differs
from any of the previous selections. The projector automatically selects a
new memory location.
Most settings are stored individually for each mode, including contrast,
brightness, tune etc. See the remote control table in the Remote Control
section.
OSD SYSTEM
The OSD (On Screen Display) system echoes on screen your keypad or
remote control actions. The OSD may be switched off and on by pressing
the OSD key on the remote control.
22
LCD PROJECTOR
Advertisement
Table of Contents
