Ask Proxima Impression 960 User Manual page 15

USER GUIDE
your monitor and re-connect with the shortest lead of the V-split (1B).
Connect the longest lead of the V-split (1A) to the monitor BNC inputs.
7.1.4 ADAPTERS
If you have a computer that requires adapters to physically connect, insert
applicable adapter(s) onto the V-split of the PC compatible cable (2A,2B)
as described in the table on page 10.
APPLICABLE CABLES/ADAPTERS :
COMPUTER
VGA
MACII and PowerMac
SUN
HP
IBM RS6000
Power PC
Silicon Graphics
DEC
NCR
1) Use either the PC cable or the BNC cable (varies with different models).
TO SET UP FROM THE REMOTE CONTROL :
To assist you in setting up and fine tuning the projector, fill a large portion
of your screen with a 50% grey pattern (alternating black and white pixels).
Then make sure that the projector is set to direct (1:1) default mode before
adjusting the frequency setting. This can be done by pressing the SCALE
button on the remote control.
STEP OPERATION
1 Press RESET for default settings
2 Adjust FREQUENCY until all vertical bands disappear
3 Adjust TUNE for a stable image
4 Press POSITION, then use cursor keys to position the image
5 Adjust CONTRAST and BRIGHTNESS as desired
6 Press SCALE to compress/expand the image if desired
CABLE ADAPTER
None
MAC (option)
13W3 (option)
None
None
13W3 (option)
13W3 (option)
None
13W3 (option)
14
LCD PROJECTOR
(1
(1