Table of Contents
Advertisement
Always ask and check the following:
1.
Is the unit connected to a live power source of the proper voltage?
2.
Check the circuit breaker.
3.
Is power switch "ON" and pilot light glowing?
4.
Check the rating label. Is the unit connected to the correct power source?
If the above checks out, and you still have problems, call an APW Wyott authorized service agent.
APW SERVICE HOT LINE 1-800-733-2203
PROBLEM
PROBLEM
Buns wont toast
Buns toast unevenly
Buns stick to grill
No power
Conveyor will not turn (Motor
turns)
TROUBLESHOOTING GUIDE
CAUSE
CAUSE
Wrong temperature setting
Excessive cupping of bun
surface
Excessive cupping of bun
surface
Conveyor pressure too light
Teflon sheet worn.
Doughy buns or excessive
sugar and moisture, plus grill
temperature too high.
Build up on Grill Surface
No power at the wall
receptacle
Power cord disconnected
Main switch
Drive gears not engaged
Gear set screws not tight
7
SOLUTION
SOLUTION
Increase temperature setting
and allow two cycles to warm
up.
Buns may be stale. Try fresher
buns
Buns may be stale. Try fresher
buns
Adjust conveyor tension
Replace Teflon sheet
Reduce grill temperature
Allow buns to age.
Clean Grill per instructions
Check circuit breaker or fuse
Check plug at receptacle
Check that switch is ON and
operative
Check gear alignment and
engagement
Check screws and tighten if
required
Advertisement
Table of Contents
