Table of Contents
Advertisement
TM
•Scotch-Brite
Griddle Polishing Pad No. 46 or Scotch-Brite™ General Purpose scrubbing Pad
number 9650 or Equivalent
Also needed:
•(Wet) terry towel
•Catch pan for food soil
•Common kitchen scraper
NOTE: Do not use a Grill Screen or Grill Brick to clean grill plate on the M-2000 Toaster.
If Teflon sheet is installed remove it when Bun Grill Toaster is cool. Set the toaster temperature to 350°F.
Scrape loose food particles with scraper into a pan under grill plate.
TM
Squeeze 1 to 2 ounces of Scotch-Brite Quick Clean Small Appliance Cleaner No. 702 or equivalent into
measuring reservoir of bottle. Pour cleaner onto pad. Do not pour directly onto grill surface.
TM
TM
Scour using Scotch-Brite Multi-Purpose Pad Holder No. 405 or equivalent, and Scotch-Brite
Griddle Polishing Pad No. 46 (or 9650). (See Figure 3)
TM
After scouring, Squeegee the surface clean with the Scotch-Brite
Squeegee No. 410 (See Figure 4)
.
Turn off Bun Grill Toaster and wipe surface with clean wet towel. If the surface is still hot, use the Scotch-
TM
Brite
Multi Purpose Pad Holder to move the towel over the surface. (See Figure 5)
Dry the grill thoroughly. Coat the grill plate with a light film of cooking oil. See Figure 6)
Rinse all cleaning tools with hot water. (See Figure 7)
Wipe down all external stainless steel surfaces with a damp cloth.
RE-ASSEMBLY
Before assembling the conveyor check the following: Fasteners on the Conveyor Assembly hardware
should be tight with no signs of wear. Conveyor Shaft Gear and Motor Shaft Gear are tight. Hanger Bracket
Screws are tight and the brackets have not shifted during use.
FIGURE 3
FIGURE 4
FIGURE 5
FIGURE 6
FIGURE 7
6
Advertisement
Table of Contents
