Dimplex DPRC20ECO-A Instruction Manual page 4

Table of Contents

Advertisement

WARNING: For using R290 refrigerant. This symbol shows that
this appliance uses a flammable refrigerant. If the refrigerant
is leaked and exposed to an external ignition source, there is a
risk of fire.
CAUTION: RISK OF FIRE/FLAMMABLE MATERIALS. THE APPLIANCE MUST BE
INSTALLED, USED & STORED IN AN AREA THAT IS GREATER THAN 13m
NB: These symbols on your device mean:
This appliance is filled with Propane gas R290. Follow strictly the manufacturer's
instruction concerning use and repairs!
Before using this appliance, you must carefully read the entire instruction
manual.
Do not install, operate or store the device in a room with a floor area smaller
than 13m
.
2
Repairs must be performed based on the recommendations from the
manufacturing company.
Note also the information presented on the appliance.
Do not use means to accelerate the defrosting process or to clean, other than
those recommended by the manufacturer.
The appliance shall NOT be stored in a room with continuously operating
ignition sources (for example: open flames, an operating gas appliance or an
operating electric heater).
Do not pierce or burn.
Be aware that the refrigerants may not contain an odour.
The appliance should be installed, operated and stored in a room with a
floor area according to the amount of refrigerant to be charged. For specific
information on the type of gas and the amount, please refer to the relevant label
on the unit itself. When there are differences between the label and the manual
on the Min. room area description, the description on label shall prevail.
Compliance with national gas regulations shall be observed.
Keep ventilation openings clear of obstruction.
The appliance shall be stored so as to prevent mechanical damage from
occurring.
A warning that the appliance shall be stored in a well-ventilated area where the
room size corresponds to the room area as specified for operation.
Any person who is involved with working on or breaking into a refrigerant circuit
should hold a current valid certificate from an industry-accredited assessment
authority, which authorises their competence to handle refrigerants safely in
accordance with an industry recognised assessment specification.
Servicing shall only be performed as recommended by the equipment
manufacturer. Maintenance and repair requiring the assistance of other skilled
personnel shall be carried out under the supervision of the person competent in
the use of flammable refrigerants.
4
15429_Dimplex DPRC20ECO-A Manual.indd 4
15429_Dimplex DPRC20ECO-A Manual.indd 4
.
2
7/09/20 4:34 PM
7/09/20 4:34 PM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents