Table of Contents
Advertisement
Contents
1.
Part Names
2.
Basic Operation
3.
Menu Operation
1.
How to Use Menu
2.
How to Use Setup Menu
3.
List of Setup Menu
Items
44.
How to Use Application
Menu
45.
Entering Letters
(Software Keyboard)
4.
USB Media
5.
Connecting Other
Devices
6.
Operating the Monitor
Using a PC (IP control)
7.
Troubleshooting
8.
Specifications, etc.
Ver. 1.00
＞
Menu Operation
＜
List of Setup Menu Items
CEC setup
Menu item name
Setup
CEC control
On, Off
Auto power on
Yes, No
INPUT1
Auto, On, Off
INPUT2
Auto, On, Off
Selecting
INPUT3
Auto, On, Off
channel
key
INPUT4
Auto, On, Off
INPUT7
Auto, On, Off
INPUT8
Auto, On, Off
Audio return channel
Auto, Off
You can also setup from the Application menu (page 3-44)
3-31
Set it to "Off" if the power supply is turned on or the channel changes
automatically when connecting a device that is not HDMI CEC enabled.
Set it to turn on automatically once an HDMI CEC-enable device is operated.
When you set "Selecting channel key" to "On", you can perform HDMI CEC-
enabled tuner built-in device operation with the remote control.(page 5-13)
For "Auto", a device operates in the same manner as it does when this is set
to "Off". Only when there is a request from a connected device however, it
will operate in the same manner as it would when this is set to "On".
"ARC (Audio Return Channel)" is the function to transmit sound from the
monitor to the AV amplifier, etc. using an HDMI cable. If you set "Audio
return channel" to "Auto", you can connect to an ARC compatible audio
device with a HDMI cable. This function is available only when it is connected
to INPUT 2 terminal.
Advertisement
Table of Contents
