Table of Contents
Advertisement
Contents
1.
Part Names
2.
Basic Operation
3.
Menu Operation
1.
How to Use Menu
2.
How to Use Setup Menu
3.
List of Setup Menu
Items
44.
How to Use Application
Menu
45.
Entering Letters
(Software Keyboard)
4.
USB Media
5.
Connecting Other
Devices
6.
Operating the Monitor
Using a PC (IP control)
7.
Troubleshooting
8.
Specifications, etc.
Ver. 1.00
＞
Menu Operation
＜
List of Setup Menu Items
Terminal setting (Continue)
INPUT7 audio setting
*1
• Sets the audio input for INPUT 7.
INPUT8 audio setting
*2
• Switches the audio input terminal for INPUT 8.
Digital audio output
*3
• Sets the signal format for digital sound
Menu
Setup
item name
INPUT7-A
Uses the INPUT7-A sound.
INPUT7-B
Uses the INPUT7-B sound.
INPUT7 audio
INPUT7-C
Uses the INPUT7-C sound.
setting
INPUT7-D
Uses the INPUT7-D sound.
Audio input terminal
Uses the Audio input terminal sound.
HDMI
INPUT8 audio
Switches the audio input terminal for INPUT 8.
setting
Analogue audio input
When connecting a device that does not support AAC / Dolby Digital, set it to
PCM
"PCM" (page 5-14). The same sound (Main, sub, M/S) as the program which is being
Digital audio
viewed will be the output.
output
To connect an amplifier that supports AAC / Dolby Digital, set it to "Bit Stream". Both
Bit Stream
the main and sub sound will be simultaneously output.
NOTE
*1 It is displayed when the input is changed to INPUT7.
*2 It is displayed when the input is changed to INPUT8.
*3 It is displayed when the input is changed to INPUT1,2,3,4.
3-36
Advertisement
Table of Contents
