Notes On Setup - Sharp PN-CD701 Installation Manuallines

Windows collaboration display

Hide thumbs Also See for PN-CD701:

Table of Contents

13. Notes on setup

Update Firmware - OOBE

Be sure to update the firmware at OOBE.

1.When PN-CD701 is started for the first time,

the following screen is displayed.

2. When you proceed, the network settings will be

displayed. Connect the LAN cable to the LAN2

terminal and update the settings to connect to

the network.

3. When the clock setting is complete, the setting

of "Update firmware" is displayed.

Confidential

When the display finds later FW, "Update" is displayed.

Press it to update. It takes around 10 minutes to download*

and around 10 minutes to update.

If FW of PN-CD701 is the latest FW, skip this section.

*Downloading is performed by connecting to the Internet, so the required

time varies depending on the type of line used and the usage status. The

time required is a guide only. It may take longer than expected or may not

download well.

Table of Contents