Table of Contents
Advertisement
K250 OWNER'S MANUAL
Extended & Slim
KIOSK INSTALLATION
Floor Mounting (optional):
NOTE: Pedestal must be used for floor mounting.
1.
Anchor bolts provided are intended for concrete. Concrete flooring must meet commercial
building standards. Verify for your local State building code.
2.
Mark the floor to correspond with the anchor holes on the kiosk.
Drill 3/8" anchor bolts holes (4 minimum) to support anchor bolts into the floor at least 4" – 5"
3.
deep.
4.
Install anchors into floor and verify that they are tight and have not damaged the floor.
5.
Lower kiosk base onto anchor bolts and secure with washers and nuts. Ensure nuts are
properly tightened.
K250 Owner's Manual
This document, including all its content is solely intended for its designated recipient and is not to be forwarded to any other company, business entity or person, without written permission from VERIFONE, Inc |
All rights reserved | Any reproduction of this document, the artwork and or the industrial designs represented within it, in part or whole without permission is strictly prohibited
(CONTINUED)
Page 16
Advertisement
Table of Contents
