NOTE: The kiosk must be mounted and secured directly to the surface of a counter top or table to
ensure structural stability.
1.
After the kiosk has been moved to the desired location, open the main kiosk door. (See
OPENING KIOSK on pages 11-12).
2.
Use the kiosk base dimensional detail (see page **) as a drilling template to accurately locate
the mounting points for the bottom of the kiosk base.
Using a drill, make (QTY 4) .5" holes (total) that correspond to the (QTY 4) separate mounting
3.
points on the baseplate.
4.
Secure the kiosk in place using the supplied mounting bolts to secure the kiosk to the counter
top.
K250 Owner's Manual
This document, including all its content is solely intended for its designated recipient and is not to be forwarded to any other company, business entity or person, without written permission from VERIFONE, Inc |
All rights reserved | Any reproduction of this document, the artwork and or the industrial designs represented within it, in part or whole without permission is strictly prohibited