Table of Contents
Advertisement
The SET PT. button enables the Product to heat or cool to a desired set-point. Until
SET PT. is enabled, the Product will not heat or cool. The Product is in a sleep state
for safety of the operator and Product.
The °C/°F button changes the displayed temperature units from °C to °F and °F to
°C.
The MENU button accesses all parameter and settings menus. From the main
D
menu, use the softkeys to access submenus and functions.
The EXIT button exits menus and cancels newly entered values.
E
The arrow buttons move the cursor on the display, change the display layout, and
F
adjusts the display contrast.
The ENTER button selects menus and accepts new values.
G
The Softkeys are the four buttons immediately below the display (F1 to F4). The
functions of the softkeys are indicated on the display above the buttons. The
H
function of the keys may change depending on the menu or function that is selected.
The block temperature indicator shows when it is safe to install the target cover. The
indicator illuminates when the target exceeds approximately 50 °C. The indicator
illuminates until the target cools to less than approximately 50 °C. If the Product is
I
disconnected from mains power, the indicator flashes until the target temperature is
less than approximately 50 °C.
Table 2. Front Panel (cont.)
Precision Infrared Calibrator
Quick Start
9
Advertisement
Table of Contents
