Removing Optical Water Indicator - KitchenAid KMTM704E Series Technical Education

COMPONENT ACCESS
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.

Removing Optical Water Indicator

1. Unplug dishwasher or disconnect power.
2. Locate Optical Water Indicator on bottom of sump
assembly (see Figure 1).
4-24 KitchenAid 2015 Microfiltration Dishwashers
n
Removing Optical Water Indicator
Figure 1
3. Rotate optical water indicator counter-clockwise 1/4 turn,
see figure 2.
4. Pull out to remove, see figure 3.
5. Disconnect harness from Optical Water Indicator.
Figure 2
Figure 3