Garmin Aera 760 Pilot's Manual page 162

Hazard Avoidance
If the number of Traffic Advisories on the traffic display decreases and then increases,
a new audio alert is sounded. The traffic audio alert is also generated whenever TIS-B
service becomes available. The following traffic audio alerts are available:
• "Traffic"—TIS-B/ADS-B traffic alert received.
• "Traffic Not Available"—TIS-B/ADS-B service is not available or out of range.
Inhibiting/Enabling the traffic alerts:
NOTE: Traffic alerts are reset to 'enabled' on the next power cycle.
1) From the Main Menu, touch Traffic.
2) Touch Menu > Alerts to toggle between Inhibited and Enabled.
Adjusting alert volume:
1) From the Main Menu, touch Tools > Setup > Sound.
2) Touch the 'Traffic Audio' Enable Button to toggle the traffic audio on/off.
TRAFFIC WARNING WINDOW
The Traffic Warning Window is shown when the compatible device issues a traffic
advisory (TA). The Traffic Warning Window shows a small pop-up map in the lower left
corner. The Range Rings on the pop-up alert are spaced every whole mile/kilometer/
nautical mile. Touch the Traffic Warning Window to acknowledge and remove it.
DISPLAYING TRAFFIC DATA
Traffic is displayed by default on the Map Page and in the Traffic Warning Window.
Traffic Symbol and Traffic Label (i.e., relative altitude, altitude trend and absolute
motion vectors) settings selects the maximum range at which traffic labels or symbols
are shown. Traffic Labels can also be turned off.
Enabling/disabling traffic data on the Map Page:
1) From the Main Menu, touch Map > Menu.
2) Touch Traffic to enable/disable traffic data on the Map Page.
Or:
146
Garmin aera 760 Pilot's Guide 190-02674-00 Rev. B