Garmin Aera 760 Pilot's Manual page 110

Flight Planning
Selecting an approach using the Direct To function:
1) Touch the Direct To Icon.
2) Touch the Menu Icon.
3) Touch Select Approach (only available when navigating a flight plan).
4) Confirm the intended airport is displayed or touch the Airport Button, select
the desired airport, and touch Enter.
5) Touch
to select the desired approach. Selections are listed according to
approach type: instrument first, visual second.
6) Touch to select the desired transition waypoint or Vectors.
7) Touch Load Approach. The Active Flight Plan Page will be displayed.
The approach waypoints are placed at the end of the flight plan and the
unit will automatically sequence to them after the en route waypoints.
Or:
Touch Activate Approach. Activating the approach makes the active
leg Direct-To the selected transition waypoint, or for Vector approaches
to activate a leg that is an extended final approach course. You can also
"activate" the approach from the Flight Plan by touching the Approach
Button > Menu > Activate Approach, if the approach is not activated
on this page.
94
Touch the Select
Approach Button
Selecting an Approach
Garmin aera 760 Pilot's Guide
Touch each button to select the desired ap-
proach and transition waypoint/vectors
Touch to load
or activate the
approach
190-02674-00 Rev. B