Table of Contents
Advertisement
3.3
Waste Electrical and Electronic Equipment (WEEE)
3.4
OEM / Host manufacturer responsibilities
OEM/Host manufacturers are ultimately responsible for the compliance of the Host and Module. The
final product must be reassessed against all the essential requirements of the RED before it can be
placed on the EU market. This includes reassessing the transmitter module for compliance with the
Radio and EMF essential requirements of the RED. This module must not be incorporated into any other
device or system without retesting for compliance as multi‐radio and combined equipment.
3.5
Antenna specifications
In all cases, assessment of the final product must be met against the Essential requirements of RE
Directive Article 3.1(a) and (b), safety and EMC respectively, as well as any relevant Article 3.3
requirements.
1. The following antennas were verified in the conformity testing, and for compliance the antenna
shall not be modified. A separate approval is required for all other operating configurations,
including different antenna configurations.
Waste Electrical and Electronic Equipment (WEEE)
This symbol means that according to local laws and regulations your
product and/or battery shall be disposed of separately from household
waste. When this product reaches its end of life, take it to a collection point
designated by local authorities. Proper recycling of your product will protect
human health and the environment.
Advertisement
Table of Contents
