Test Equipment And Setup; Table 4-4. Led Descriptions - Texas Instruments TPS25948EVM User Manual

www.ti.com
LED
D1
D3
D7

4.2 Test Equipment and Setup

4.2.1 Power Supplies
One adjustable power supply with 0-V to 23-V output and current limit greater than 9 A.
4.2.2 Meters
One DMM minimum needed.
4.2.3 Oscilloscope
A DPO2024 or equivalent, three 10x voltage probes, and a DC current probe.
4.2.4 Loads
One resistive load or equivalent that can tolerate up to 8-A DC load at 23 V and capable of the output short.
SLVUCK4A – MARCH 2023 – REVISED JULY 2023
Submit Document Feedback

Table 4-4. LED Descriptions

When ON, indicates that SPLYGD is asserted for channel 1
When ON, indicates that FLTb is asserted for channel 1
When ON, indicates that SPLYGD is asserted for channel 2
Copyright © 2023 Texas Instruments Incorporated
Description
TPS25948EVM Evaluation Module for TPS25948 eFuse
General Configurations
7