Setting Up Web Interface Management; Pre-Requisites - 3Com SuperStack 3 3C17204 Getting Started Manual

Setting Up Web
Interface
Management

Pre-requisites

Netscape 4.76
Netscape 6.2
Netscape 7.0
Internet Explorer 5.5
Internet Explorer 6.0
7 Enter your usual username and password to access the CLI commands.
For increased security please change the default password when using
SSH for the first time.
For further information on generating a host key on your switch and
transferring keys to the Switch using TFTP server please refer to
Chapter 11 of the "SuperStack 3 Switch Implementation Guide".
This section describes how you can set up web interface management
over the network.
Ensure you have already set up the Switch with IP information as
■
described in
Ensure that the Switch is connected to the network using a Category
■
5 twisted pair Ethernet cable with RJ-45 connectors.
A suitable Web browser.
■
Choosing a Browser
To display the web interface correctly, use one of the following Web
browser and platform combinations:
Table 8 Supported Web Browsers and Platforms
Windows Windows
95 98
✓ ✕
✕ ✓
✕ ✓
✓ ✓
✕ ✓
For the browser to operate the web interface correctly, JavaScript™ and
Cascading Style Sheets must be enabled on your browser. These features
are enabled on a browser by default. You will only need to enable them if
you have changed your browser settings.

Setting Up Web Interface Management

"Setting Up Overview"
Windows Windows
NT 4
✕
✓
✓
✓
✓
on page 34.
Windows
2000 XP
✕ ✕
✓ ✓
✓ ✓
✓ ✓
✓ ✓
51
Solaris
2.6
✓
✕
✕
✕
✕